WARNING: A long post with lots of photos. Leave now while you’ve got the chance. 😉
I need to start by showing you two wildflowers/weeds near my house. I’m hoping someone can identify at least one of them for me. The first is really sweet and small. You can see a portion of my foot in the photo for scale. The little flower is a nice orange. I don’t recall ever seeing this plant before. I’m thinking it’s a garden escapee?
![orange mystery wildflower](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/mystery-weed-1.jpg)
Then there’s the big weed that’s taken over the side yard of an abandoned house near me. When it was small I thought it was milkweed. It’s clearly not. I feel like I should know this one, and that it’s bad, but I can’t place it. I should probably get out my wildflower book. The stalks are quite red, and probably 3′ tall.
So other than looking at weeds/wildflowers, what else have I been doing? Well, at the show last weekend it was clear to me that I should weave more bookmarks. I decided I wanted to do some monk’s belt, a weave structure I think I’ve only previously done in classes. I thought I’d wound a warp long enough to make 16 bookmarks, but I only got 13 out of it. That’s ok.
![monk's belt bookmarks](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/monks-belt-bookmarks.jpg)
Then I really wanted to try doing some ombre dyeing with Rit dyes at home. I had picked up 3 cones of a really nice pima cotton at a local resale store. It’s quite thick, 790 ypp, very soft, and I figured it would weave up quickly and take dye well, plus I wasn’t out much money if it didn’t work. So I wound a warp for two scarves, and wove the first one with an undulating twill.
![undulating pima on the loom](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/undulating-pima-on-loom.jpg)
After that, remembering my recent undulating twill disaster (different draft), I re-threaded for huck lace, but forgot to take a photo on the loom. I got both scarves woven, then spent a bunch of time online looking at websites and blogs about ombre dyeing. I have to say, there was quite a bit of inconsistency in process and time needed, so I figured I’d have to go with my gut. I got the scarves washed and rinsed, then brought the needed tools outside.
![dye tools ready](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/dye-tools.jpg)
I mixed up a bottle of Rit dye with a cup of salt in about a gallon of water – maybe a little more.
![blue dye mixed](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/dye-mixed.jpg)
Then I started dipping. Since the yarn was unbleached and quite creamy colored, I didn’t think it would look good with the center having no dye at all, so dipped the entire scarf quickly.
Then I proceeded to lower and raise the scarf (note that it’s folded in half here), since I didn’t want distinct color lines. I dipped the middle section about 30 times. I wanted the bottom quite dark, and dipped it about 120 times. Then I hung it on my arbor (another story for another time). I went in the house to get the second scarf and the next bottle of dye. While I was gone the wind kicked up and blew the scarf against my neighbor’s fence.
That wasn’t a big deal, but the splatters on my neighbor’s garage were.
![garage splatters](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/garage-splatters.jpg)
I ran back into the house and got paper towels and dish soap. Should have had those tools outside with me to begin with. I moved the scarf to the front of the arbor and started on the next scarf, mixing up a batch of red dye.
![red dye mixed](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/red-dye-mixed.jpg)
It was too red for me, so I mixed in a bunch of the blue.
I wish the store had had more than 5 colors for me to choose from – these 2, plus black, brown, and dark green. Anyway, I followed the same process with the red dye. Here are both scarves hanging and dripping from the arbor.
![hanging and dripping](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/hanging-outside.jpg)
You’d think I would have learned from the experience with my neighbor’s garage, and taken more care when I dumped out the blue dye in the weeds behind my own garage, but no.
There was so much of it that it didn’t really wipe off. I decided since it’s behind the garage I didn’t really care. So I headed to the other side of the yard and started the clean up. Fewer tools needed.
![dye cleanup tools](https://secondwindjewelry.com/jewelry-weaving-blog/wp-content/uploads/2016/07/cleaning-tools.jpg)
Interestingly, the red dye really stained the dishpan and the blue washed out almost completely. I would have expected the opposite, since in my experience red dye runs A LOT.
While the scarves were hanging outside dripping, I picked a mess of peas, went inside and shelled, steamed, quick-chilled, and froze a bag of them.
After a while I went back outside and brought in the scarves. I laid out a long piece of plastic wrap on the kitchen floor and laid a scarf on it.
I covered it with another layer of plastic and rolled it up. Then I did the same thing with the red scarf.
After they were all rolled up I put them on my heating pad, set on low, where it will sit overnight, hopefully setting that dye.
Tomorrow I’ll rinse the scarves and press them. I won’t know until then how well it worked. I’m actually hoping that some of the dye rinses out since both scarves are a bit darker than I had in mind.
I’ll share the results with you!